Alloy Designation: 6005
Supply Status: T6
Colour and thickness of oxide film: Oxidation of white,thickness film AA10
Technological Process
extrusion
|
aging
|
sand blast
|
anodizing
|
plastic film pasting
|
operation
|
Chemical component
| Mass fraction(%) |
| Designation |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Other impurities |
Al |
| 6005 |
0.6~0.9 |
≤0.35 |
≤0.1 |
≤0.1 |
0.4~0.6 |
≤0.1 |
≤0.1 |
≤0.1 |
single |
total |
residue |
Mechanical property
| Aluminum Alloy Designations |
tensile strength (MPa) |
Specify non-proportional tensile stress(MPa) |
rate of elongation(%) |
Webster's hardness(HW) |
| 6005/T5 |
≥260 |
≥240 |
≥8 |
≥14 |
| 6005/T6 |
≥255 |
≥215 |
≥6 |
≥15 |
surface treatment
After sandblasting, the section was anodized and the film thickness was AA10,AA12,AA15
Oxide film properties
| Level of film thickness |
anodic oxide film |
| |
Salt spray corrosion resistance (CASS test) |
Abrasion resistance (shakeout test) |
| AA10 |
Time/H |
Grade |
Abrasion coefficient (f), g/ mum |
| |
96 |
≥9 |
≥300 |
Packing and Loading
FAQ
Q:Delivery
A:EXW/FOB/CIF is normally workable for us. Regarding lead time,usually it is 30days.for some items that needed to develop new moulds, the time will be a few days more,that will be around 30 days.
We has a professional transportation team,if you have no designated delivery agent,we will arrange delivery for you as soon as production is completed.
Q:Payment
A:The payment term with Vanho is flexible, T/T,LC is normally acceptable, we will make communications in details.
Q:Packaging
A:We can supply polybag packing,carton, wooden case and so on, If you have other requirement, we can make your design according your demands.
Q:Quality
A:We mainly export goods to high requirement markets, our products have ISO . the quality can bring clients more confident on door hardware business,and help you to consolidate your market share.
Q:Can I make the products with my own logo?
A:Sure, we provide OEM services to you, make your logo on the products and cartons, we have rich experience in this.
Q:I have my own idea to the products, can you help and produce my own products?
A:Sure, ODM service is available to us,our experienced engineer would customize and develop the aluminum profile system for you.
Meanwhile, we won't disclose any information of your products to third party.
Q:I want to work with you, but I`m not familiar with your products, how could I do ?
A:We have professional engineers who could design a complete and perfect solution with clear connection diagram for you, with detail introduction to the products, you would find it easy working with us.
Audited Supplier 
){kind=link}